QwikSeal® in intended to be used with the QwikInjector® (QT2510). You will need to connect the QwikInjector® to your manifold. Then pour QwikSeal® Part A (Drying Agent) in to the injector. You will then need to connect to the low side of the cooling system first, and connect to the high side second. Finally, you will need to open the manifold valve. The high side pressure will push the QwikSeal® through the low side of the system. After the system has operated for at least 5 minutes, repeat this process to add QwikSeal® Part B (Sealent) to the system.
