What is the pressure drop introduced by adding the TripleGuard™ system into the duct work of my house?

J Betancourt

This is an important question, because if the airflow across the evaporator is reduced, due to any increased pressure drop caused by adding something in the air flow path, such as a TripleGuard air purifier, an extremely dirty air filter, or a denser air filter, performance can suffer, especially in areas where cooling and not dehumidification dominate. For more modern …

Where should it be installed?

J Betancourt

It is recommended that the TripleGuard™ be installed in the supply duct, above the air handler for the maximum efficiency.

Does the TripleGuard™ air purifier remove SARS-CoV-2 that causes COVID-19?

J Betancourt

The laboratory testing performed by Intertek (see results here) could not use actual SARS-CoV-2 virus that causes COVID-19 for obvious safety reasons, so the independent certified testing laboratory’s approved procedure is to use a similar and actually harder to remove virus, in this case they used  Phi X174 bacteriophage. This surrogate works because it is one of the smallest known …

Does the TripleGuard™ Unit have to completely span across the ductwork it is inserted into?

J Betancourt

No, in fact it is a rare (and unwanted) installation when the TripleGuard™ unit encompasses the entire cross-sectional area of the ductwork. The TripleGuard unit need only see a portion of the air flow because the conditioned air is continually recycled throughout the structure, and eventually all the air passes through the TripleGuard unit for purification. Your installer will avoid installation …

Does the mounting orientation matter?

J Betancourt

No, the TripleGuard™ unit can be mounted vertically or horizontally. The only important mounting consideration is the air flow direction. Airflow must enter the UV-C bulb side of the unit and exit from the activated carbon/potassium permanganate (AC/PP) side of the unit.

Why is the air filter located upstream of the blower and the TripleGuard™ located downstream of the blower?

J Betancourt

The most critical location criterion is to locate the air filter before the TripleGuard™ unit so that the active catalytic surfaces and light-emitting surfaces don’t become totally covered with dust that would have been removed by the air filter. Locating the TripleGuard downstream of the blower also assures that the owner should not be able to accidentally see the UV-C …